The basic principal of operation includes a laser source directed to a 2-axis detector which is communicating with a display unit. After establishing a "zero" point all changes are updated "LIVE" on the display unit screen. 120 measurement points may be saved, recalled, printed and uploaded into the software. The Display Unit contains the measurement programs to conduct straightness, flatness, parallel, perpendicular, line bore and spindle measurements.
Includes:
1 Display unit
1 Leatherette case
2 Cables and Push/Pull connection (2m, 5m)
1 Detector
1 Magnetic base
2 Sets of extentions rods
1 Easy-LaserTM Link floppy disk and cable
1 Measuring tape
1 Manual
1 Carrying case
For complete system, add appropriate lasers and other accessories
D-22 Laser Transmitter
Laser:
Class II, visible diode 635-670 mm
Range:
30 m (100 ft) radius horizontal plane (Special order 90 m (300 ft))
Adjustments:
Leveled to 5 arc sec. (0.025 mm/m) both in the vertical and horizontal mounting positions
Fine Tuning:
0.4 arc sec. (0.002 mm/m) within range of 1.8" (60 mm/m)
Swivel Head:
360 degrees tuned to 40 arc sec. (0.2 mm/m)
Reference Plane:
Flat within 20 microns over 360 degrees sweep
Perpendicular:
Accurate to ref plane 2 arc sec. (0.01 mm/m)
Dimensions:
140 x 140 x 150 mm (5.5" x 5.5" x 6")
Weight:
2650 g (5.6 lbs)
Power:
1 "C" cell (R14) battery, 1.5 volts
Operation:
approx. 15 hours continuous
Mounting:
5/8" UNC tripod and/or integral magnets
D-46 Angular Prism
Optics:
Penta Prism, 20 mm aperture with 360 degree rotation
